Android users who want the best power, storage, and camera experience will be hard pressed to find a smartphone that does not offer a fingerprint scanner or a fingerprint sensor built in.

The Huawei Ascend Mate 7, however, is a smartphone you can buy today, but only if you’re willing to spend a few hundred pounds.

Huawei has a new fingerprint sensor for its latest flagship device, and it’s one of the best available for smartphones today.

Huawei’s new sensor is called “M7N,” and it looks a little like a cross between a fingerprint reader and a fingerprintprint reader.

It can read the size of your palm, but it’s not able to unlock the phone.

Instead, you need to swipe up on the device to access the fingerprint sensor.

To unlock, you have to use the front-facing camera.

Huawei uses a variety of sensors in the Ascend Mate series, but we think the one that stands out is the one for the fingerprint reader.

That sensor is made of aluminum, and the color is a rich gray.

It’s a good thing because the fingerprint scanner on the Ascend’s Mate 7 is terrible, and Huawei’s Mate 8 is a better choice.

The fingerprint scanner works on all four sides, but the top is the only one you can see when you’re holding the phone up to your face.

It has a flat surface, so it can be used to swipe the screen, but you have a tendency to use it too quickly.

Huawei also offers a magnetic fingerprint reader for the Mate 7N.

The one we like best is the magnetic one that you can find on the M8 and the Mate 9.

When you’re ready to use your phone, you simply place the phone on the magnetic surface, then use the fingerprint recognition to unlock it.

You’ll be prompted to pick a password, then enter it and press the button at the bottom of the screen.

The button on the bottom will flash green to confirm that the password is correct.

Once the password has been entered, the phone will unlock.

The magnetic fingerprint scanner can be found on the front of the Ascend smartphone, and there’s no indication on the phone’s face that it’s magnetic.

The sensor has a 1.6 micron sensor that can read up to 8x the size and depth of your fingertip.

The top is actually flat, so you can swipe it with the fingerprint detector on the side, but otherwise it’s an average sensor.

Huawei says the sensor can detect about a thousand different fingerprints at a time, so there’s a fairly high level of accuracy.

If you want to buy a fingerprintreader, though, there’s the $200, $400, and $800 options.

It also comes with a battery and camera app that lets you adjust brightness and shutter speed.

Huawei claims that the sensor has an 80 percent error rate, which is quite high for a fingerprint-reading sensor.

You might want to invest in a higher-end device with a better sensor.

The Ascend Mate7N is priced at $499 for the 16GB model, which we like for its affordable price tag.

You can also get the 32GB model for $699.

Huawei didn’t provide a release date for the new Ascend Mate9, but a price has been announced.

The new Ascend’s flagship phone has a 5.5-inch 1080p IPS display with Gorilla Glass 4, and a 1,920×1,080 resolution.

Huawei doesn’t use Gorilla glass on the Mate9 because it doesn’t offer the same level of performance as the older models.

There are two main components on the back of the phone: a Snapdragon 835 processor, which runs at 2.3GHz, and Adreno 330 GPU.

The Snapdragon 837 chip on the flagship Ascend Mate 9 is a lower-power version of the Snapdragon 845.

Both are available on the 16 and 32GB models, respectively.

Huawei offers a $400 price cut on the 32G version, but does not include a 64GB model.

If the 32Gb model is what you’re after, Huawei offers the Mate 10 for $700.

It comes with an 8-megapixel rear camera with laser autofocus, 1080p resolution, and dual-tone LED flash.

The Mate 10 also includes a 16-megabyte memory card slot, a 2,300mAh battery, a fingerprint magnetometer, and 3G connectivity.

Huawei offered a price cut for its Mate 10 with a lower price point on the 8GB model at $799.

Huawei makes its phones with its own manufacturing process, which uses a single-wafer manufacturing process to produce a smartphone.

We don’t know how long Huawei will use the same process on the new Mate 10, but there’s little reason to expect Huawei’s process to change.

If Huawei can use the single-layer manufacturing process for its next flagship phone, we expect it will, too. We